Automatic Pet Door includes Autoslide in either Black or White, two(2) Wireless Push Buttons and two(2) Wireless Pet Sensors. Once Autoslide is installed to the existing sliding door it can be opened automatically by humans either via the wireless push buttons or via the built-in pull assist where just a gentle pull of the door handle will activate a full open. Doors will automatically close after the adjustable time delay.

To activate the automatic pet door function the opener must learn by using a dip switch. You can set the pet opening width to suit the size of your pet.

Optional Pet Pad or Pet Collars are also available.

Autoslide Pet Door Kits work for both humans and pets. You do not need a separate Auto slide drive system for your own use. The door will now always automatically open for you and your pet. No more getting up to open the door for your pets! Your pets no longer have to bark and whine for you to open the door for them.

Had enough of your pet going in and out? Switch back to Automatic mode to temporarily disable the pet sensors. Handy for night time when you want to lock the door for them.

With the motion sensor pet door kits, one wireless battery operated motion sensor is mounted on the inside of the house to let your pet out and the other wireless motion sensor is mounted on the outside for your pet to come back in. When your pet is within the beam range of the motion pet sensor, the sensor sends a signal to the Autoslide system to automatically open the door for them.

Note: Infrared motion sensors are light sensitive and will NOT work well with totally black colored pets. We recommend black colored pets use either a pet collar or a pet mat.

Only one magnetic pet sensor is required per door and needs to be hard wired back to the Autoslide system using the included cable.  The sensor will need to be mounted on the outside of the sliding door as close to the glass as possible so that it can pick up the signal from the collar tag on the pet. If there is a screen door as well as a glass door, it is recommended that you purchase an additional wireless motion pet sensor for the inside to let the pet out and mount the magnetic pet sensor on the outside to let your pet back in.

Place the included Pet Mat near the inside of your sliding door and attach the wireless transmitter to your door frame.  This will allow your pet to freely exit your home and ensure that only your pet can re-enter

More than one pet? Each magnetic kit comes with two collar tags but you can purchase more separately. You can have as many collar tags as you need, they will all work with the same sensor.

Note: AUTOSLIDE does not assume any responsibly or liability for unwanted animals entering the house by following closely behind unknowing pets or running in just before the door time out closes